SOLAR ENHANCED LED SPEED SIGN
- Increase the visibility of the message and improve safety
- Automatic dusk to dawn operation
- > 5 nights autonomy
- IP65 Waterproof design
- Day and/or night operation
- Quality Lithium-ion battery
- Simple install - Secures to a standard 60mm sign post
- Alternative regulatory signs available
- Efficient and effective visual enforcement
- 2 year warranty for faulty workmanship or component failure not influenced by external means.
Solar LED enhancing road signs is a simple and effective way to increase the visibility of the message and improve the safety of pedestrians and vehicles. The innovative technology employs a set of synchronised ultra-bright reflective backed LEDS that operate day and/or night and are visible up to 2000 metres. A solar panel connected to high-quality lithium-ion battery allows > 72 hours of LED operation from a single full charge. The road signs offered are manufactured to Australian standards from aluminium and 3M reflective material and attach to standard 60mm galvanised signposts to provide efficient and effective visual enforcement.
|
SKU |
SSR1-4A |
|
Solar Panel Wattage |
5W |
|
LED Output |
3.6W |
|
Lumen Output |
500 lm |
|
Battery Type |
Lithium- ion |
|
Battery Specifications |
8.8AH 3.7V (32.56Wh) |
|
Autonomy |
> 5 nights |
|
Correlated Colour Temp (CCT) |
620k (Red) |
|
Fixture Size |
450 x 600 x 65mm |
|
Light Source |
Epistar F5 LED |
|
Recharge |
6 hours |
|
Mounting Height |
Various |
|
Mounting |
Wall or post |
|
Finish |
Aluminum/3M reflective material |
|
Warranty Period |
2 years |
|
|
|
Remote controllable selection of flashing dusk to dawn or constant 24 hour operation. Alternative modes of operation are available on request.
What is a Lumen?In simple terms, Lumens are a measure of the total amount of visible light from a lamp or light source. The higher the lumen rating, the “brighter” the lamp will work.
How does this compare with other light sources?Familiar examples
• A typical 4 x D cell battery maglite will emit approx. 70 lumens
• *The PIR (passive infrared) sensor is activated by movement and acts as a power saving feature. The light will operate at 30% output until the PIR is activated where it will operate at 100% until no movement is detected, returnign to 30%
