10 Ton rated solar road or lane markers
- Trafficable, self-contained, rechargeable
- Visible over 800 metres
- Single or dual sided
- Static or flashing modes
- Easy to install
- 10 Ton load rating
- > 5 year expected lifespan
- Cast aluminium and polycarbonate construction
- Zero maintenance or ongoing costs
- Various colour options available
- Automatic dusk to dawn lighting
- 2 year warranty for faulty workmanship or component failure not influenced by external mean
Solar Road Markers or lane markers are a low-cost, self-contained, rechargeable, LED illuminated marker. Visible up to 800 metres they are used to reduce speed or signal driver attention to common features, hazards and dangerous bends on our roads. Commonly used on sharp corners, pedestrian refuges, traffic islands and dividing lines. The aluminium casings are rated to 10 tons, single or dual sided in static or flashing modes providing clear and visible traffic guidance in all weather conditions. Multiple colour options are available. These units require no maintenance and generate no ongoing operational costs.
SKU |
SORM10 |
Solar Panel Wattage |
0.3W |
LED Output |
0.2W |
Lumen Output |
48 lm |
Battery Type |
Nickel–metal hydride |
Battery Specifications |
0.6AH 1.2V (0.72 Wh) |
Autonomy |
> 5 nights |
Correlated Colour Temp (CCT) |
6000K |
Fixture Size |
105mm x 105mm x 23mm |
Light Source |
Epistar F5 LED |
Recharge |
5 hours |
Mounting Height |
23mm |
Mounting |
Surface mount, no spigot |
Finish |
Aluminum/polycarbonate |
Warranty Period |
2 years |
Automatic dusk to dawn lighting. Flashing or static. multiple colours options available.
What is a Lumen?In simple terms, Lumens are a measure of the total amount of visible light from a lamp or light source. The higher the lumen rating, the “brighter” the lamp will work.
How does this compare with other light sources?Familiar examples
• A typical 4 x D cell battery maglite will emit approx. 70 lumens
• *The PIR (passive infrared) sensor is activated by movement and acts as a power saving feature. The light will operate at 30% output until the PIR is activated where it will operate at 100% until no movement is detected, returnign to 30%