Low profile glass solar road or lane markers
- Road embedded, high impact, trafficable
- Visible over 1000 metres
- 360° visibility
- Static or flashing modes
- Low profile heavy duty trafficable
- 20 Ton load rating
- > 5 year expected lifespan
- Toughened glass construction
- IP68 submersible waterproof rating
- Zero maintenance or ongoing costs
- Various colour options available
- Automatic dusk to dawn lighting
- 2 year warranty for faulty workmanship or component failure not influenced by external mean
Embedded toughened glass Solar Road Markers are a high impact, trafficable, self-contained, rechargeable, LED illuminated marker. Visible up to 1000 metres they are used to reduce speed or signal driver attention to hazards and dangerous bends on our roads. Commonly used on sharp corners, roundabouts, traffic islands and delineations. The toughened glass models are rated to 20 tons and offer 360° visibility in static or flashing modes providing clear and visible traffic guidance in all weather conditions. Multiple colour options are available. These units require no maintenance and generate no ongoing operational costs.
|
SKU |
SORML |
|
Solar Panel Wattage |
0.3W |
|
LED Output |
0.2W |
|
Lumen Output |
48 lm |
|
Battery Type |
Nickel–metal hydride |
|
Battery Specifications |
0.6AH 1.2V (0.72 Wh) |
|
Autonomy |
> 5 nights |
|
Correlated Colour Temp (CCT) |
6000K |
|
Fixture Size |
113mm Dia x 45mm |
|
Light Source |
Epistar F5 LED |
|
Recharge |
5 hours |
|
Mounting Height |
25mm |
|
Mounting |
20mm embedded 25mm above ground |
|
Finish |
Toughened glass |
|
Warranty Period |
2 years |
|
|
|
Automatic dusk to dawn lighting. Flashing or static. multiple colours options available.
What is a Lumen?In simple terms, Lumens are a measure of the total amount of visible light from a lamp or light source. The higher the lumen rating, the “brighter” the lamp will work.
How does this compare with other light sources?Familiar examples
• A typical 4 x D cell battery maglite will emit approx. 70 lumens
• *The PIR (passive infrared) sensor is activated by movement and acts as a power saving feature. The light will operate at 30% output until the PIR is activated where it will operate at 100% until no movement is detected, returnign to 30% output.
