Product Code: SOLL011/200
Product Availability: In stock

200W Solar Flood Light

  • Adjustable lamp and panel brackets

  • Purpose designed wide and a forward throw diffuser. 1200 beam angle

  • Illuminate large areas effectively

  • High quality inbuilt LifeP04 battery

  • Constant lighting (no P.I.R)

  • Remote controls ON/OFF and timer functions

  • Wall or column mountable

  • Custom bracketing or powder coated poles available on request

  • Premium Bridgelux LED’s

  • 5200mm panel to light head cable

  • 2 year warranty for faulty workmanship or component failure not influenced by external means

The 200w flood lights polished and stepped diffuser is purpose designed to spread and throw the light produced by the Bridgelux LED’s illuminating large areas effectively. This model does not use a P.I.R (passive infrared sensor) ensuring constant illumination of the area. The supplied remote controls on/off and timer functions offering the ability to control the light to suit specific site conditions. Solar panel and light head mounting hardware are included. The 5200mm of cabling between the light head and the solar panel allow the panel to be remote located to achieve maximum photovoltaic conversion.



Solar Panel Wattage


LED Output


Lumen Output

6000 lm

Battery Type


Battery Specifications

18AH 12.8V (230WH)


>30 hours

Correlated Colour Temp (CCT)


Fixture Size

400 (I) x 320 (w) x 108 (h) mm

Light Source

Epistar 5730


6 hours

Mounting Height

5 - 8 metres


Wall or column


Powdercoated cast aluminum

Warranty Period

2 years

Additional Information
Operational Modes

Constant output lighting, no P.I.R (passive infrared sensor) . Remote control over ON/OFF, 4 or 6 hour timer or dusk to dawn operation.

What is a Lumen?

In simple terms, Lumens are a measure of the total amount of visible light from a lamp or light source. The higher the lumen rating, the “brighter” the lamp will work.

How does this compare with other light sources?

Familiar examples
• A typical 4 x D cell battery maglite will emit approx. 70 lumens
*The PIR (passive infrared sensor) is activated by movement and acts as a power saving feature. The light will operates at 4 LEDs output until the PIR is activated where it will operate at 100% until no movement is detected returning to 4 LEDs output.